Multisystem Lights

Turnbuckles tighten and secure the cables and provide the necessary tension for a clean look.Width: 1.80"Height: 5.50"Weight: 0.85 lb, IncludedSKU ...

This single-feed surface transformer converts standard 120 volt line-voltage to 12 volts to provide the necessary voltage for powering a Kable Lite...

This dual-feed surface transformer converts standard 120 volt line-voltage to 12 volts to provide the necessary voltage for powering a Kable Lite s...

Suspension cable virtually disappears for a clean and elegant look.Width: 12.00"Height: 144.00"Weight: 0.20 lb, IncludedSKU #: 026310

Suspension cable virtually disappears for a clean and elegant look.Width: 12.00"Height: 360.00"Weight: 0.20 lb, IncludedSKU #: 026315

Clear plastic tubing insulates bare cable from another cable or metal.Width: 1.00"Height: 1.00"Weight: 0.10 lb, IncludedSKU #: 026264

Plastic connectors join cables end to end and isolate power feeds from each other.Width: 1.80"Height: 5.50"Weight: 0.01 lb, IncludedSKU #: 026288

Hardware used to mount turnbuckles and anchors to a plaster surface.Width: 1.00"Height: 1.00", IncludedSKU #: 026287

For short, straight runs (runs under 20`).Width: 1.50"Height: 1.00"Weight: 0.15 lb, IncludedSKU #: 026313Collection: Slimline

This single-feed surface transformer converts standard 120 line-voltage to 12 volts to provide the necessary voltage for powering a Kable Lite low-...

This single-feed surface transformer converts standard 120 volt line-voltage to 12 volts to provide the necessary voltage for powering a Kable Lite...

This single-feed surface transformer converts standard 120 line-voltage to 12 volts to provide the necessary voltage for powering a Kable Lite low-...

This single-feed flush transformer converts standard 120 line-voltage to 12 volts to provide the necessary voltage for powering a Kable Lite low-vo...

This single-feed surface transformer converts standard 120 line-voltage to 12 volts to provide the necessary voltage for powering a Kable Lite low-...

Hardware used to mount turnbuckles and anchors to a brick or cement surface.Width: 1.00"Height: 1.00", IncludedSKU #: 026284

Connectors join cables end to end.Width: 1.00"Height: 0.30"Weight: 0.05 lb, IncludedSKU #: 026266

Directional hardware for making a floating horizontal turn when the ceiling is inaccessible.Width: 4.00"Height: 30.00"Weight: 0.30 lb, IncludedSKU ...

Plastic connectors join cables end to end and isolate power feeds from each other.Width: 1.00"Height: 0.30"Weight: 0.01 lb, IncludedSKU #: 026262

Pair of power jumpers transfers power from one cable run to another.Width: 0.30"Height: 1.30"Weight: 0.25 lb, IncludedSKU #: 026268

Turnbuckles tighten and secure the cables and provide the necessary tension for a clean look.Width: 1.00"Height: 4.00"Weight: 0.40 lb, IncludedSKU ...